DuPont

• Excellent ink transfer printing provides great uniformity, especially on low-quality substrates
• High resolution exposure provides higher print quality
• The relief image is clean and clear
• Extremely wide range of exposure ensures a single exposure without masking
• Excellent uniformity of thickness
• Shape is ready to print in less time
• High resistance to ozone and white light allows you to store the products for a long time

Forms Cyrel® DS2 compatible with solvent-based inks, water-based paints, and also with many UV inks.

Expose the plate through the back to create a "cap" and maximize sensitivity. Back exposure varies according to relief required. Remove the protective sheet and record the image with the Cyrel® Digital Imager (CDI). Spend the main exhibition. Process the plate in the Cyrel® solvent processor to remove unexposed polymer. Spend finisher to remove residual surface tackiness.

To install the recommended forms Cyrel® DS2 device mounting photopolymer plates Cyrel® Microflex. Double-sided adhesive tape should be applied to the printing cylinder or sleeve in a form for easier and precise assembly. The polyester base will maintain accurate register even for large forms.

Unexposed plates should be stored in a cool place (4-32 ° C), away from direct heat sources. Humidity control is not required. Packages are Cyrel® DS2 is foam interleaved to provide maximum protection of the plate during transportation and storage. Plates should be stored in a horizontal position. Plates should not be exposed to direct sunlight or bright white light. Avoid exposure to ozone.

Cyrel® DS2 photopolymer plates should be handled under UV free light; fluorescent bulbs should be covered with a special film that protects from UV radiation.