DuPont

• Easy to use on a printing press
• Excellent ink transfer printing provides great uniformity
• High resolution exposure provides higher print quality
• The relief image is clean and clear
• High resistance to ozone and white light allows you to store the products for a long time

Forms Cyrel® DPU provide excellent compatibility with solvent-based inks, UV inks and water based paints.

Expose the plate through the back to create a "cap" and maximize sensitivity. Back exposure varies according to relief required. Remove the protective sheet and record the image with the Cyrel® Digital Imager (CDI). Spend the main exhibition. Process the plate in the Cyrel® solvent processor to remove unexposed polymer. Spend finisher to remove residual surface tackiness.

To install the recommended forms Cyrel® DPU device mounting photopolymer plates Cyrel® Microflex. Double-sided adhesive tape should be applied to the printing cylinder or sleeve in a form for easier and precise assembly. The polyester base will maintain accurate register even for large shapes

Unexposed plates should be stored in a cool place (4-32 ° C), away from direct heat sources. Humidity control is not required. Packages are Cyrel® DPU is foam interleaved to provide maximum protection of the plate during transportation and storage. Plates should be stored in a horizontal position. Plates should not be exposed to direct sunlight or bright white light. Avoid exposure to ozone.

Photopolymer Cyrel® DPU plates should be handled under UV free light; fluorescent bulbs should be covered with a special film that protects from UV radiation.